|
HP Aruba 2530-24G Switch Germany J9776A Specifications Type Aruba 2530-24G Switch System specifications Ports · 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only· 4 fixed Gigabit Ethernet SFP ports.· 1 dual-personality (RJ-45 or USB micro-B) serial console port Supports a maximum of 28 Gigabit Ethernet ports. Memory and processor Processor: ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 1.5 MB dynamically allocated. Mounting Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall mounting. Management IMC - Intelligent Management Center; command-line interface; Web browser; configuration menu; Out-of-band management (serial RS-232C or Micro USB); IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB. Performance (IPv6 Ready Certified) 1000 Mb latency < 2.3 µs (LIFO 64-byte packets) 100 Mb Latency < 7.4 µs (LIFO 64-byte packets) Throughput Up to 41.6 million pps (64-byte packets) Switching capacity 56 Gb/s MAC address table size 16000 entries Physical specifications Dimensions (W x D x H) 44.3 x 25.4 x 4.45 cm (17.44 x 10.00 x 1.75 in) (1U height) Weight 2.77 kg (6.1 lb) Electrical specifications Maximum heat dissipation 164 BTU/hr (173.02 kJ/hr) Voltage 100 - 127 / 200 - 240 V ac Current .6/.4 A Idle power1 28.8 W Maximum power rating2 48.0 W Frequency 50/60 Hz NOTE: 1: Idle power is the actual power consumption of the device with no ports connected. 2: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. |
