Air Mattress Bed & Pump- Farah - Taj Scientific

Air Mattress Bed & Pump- Farah

For the prevention and treatment of bedsores for bedridden patients to use.

Usage:
The host placed on the desktop or in the flat end of the bed with the local hook hooked bedstead .
The bedsore prevention mattress flat on the bed .
The hosts were two gas nozzle structure and bedsore prevention mattress 2 gas nozzle connected to the interface with the airway and make sure the airway is no knot , otherwise not normally aspirated .
Will host the biggest pressure regulator knob to the position .
Plug in the mains power outlet , turn the power switch when the indicator light indicates that the machine has been working .
Observed the bed began to inflate.
Approximately 15 minutes later when the mattress enough gas can then adjust the air pressure adjustment knob at the appropriate location based on the patient sleep hard and soft comfort..

Precautions and warnings and suggestive description :
In order to guarantee results, the pump should always be in working condition . In case of emergency needs quickly deflated , pull the handle CPR
Bedsore prevention mattress should prevent sharp stab or scratch .
Bedding sheets or thin blankets on the mattress , but not shop plastics, rubber and other goods of poor ventilation , to avoid affecting the flow of air exhaled air
Should prevent air cushion guide connecting tube knot.
As in the case of gas leak occurs , you should check whether the air strip joints on both sides of the loose phenomenon .
The operator should periodically clean the bedsore prevention mattress cleaning with a neutral detergent scrub only prohibit heating or steam pressure sterilization.

Note:
antacid . Anti-alkali .
Bedsore prevention mattress from the date of sale within 7 days if the quality of the company to rely on the warranty card exchange .
The product re-use process due to scratches caused by human activity , air leaks , the Company shall not be swapped .