CISCO ACCESS POINT WAP4410N

Manufacturer: Cisco

Type: Wireless access point
Connectivity Technology: wireless
Data Link Protocol: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft)
Network / Transport Protocol: DHCP
Features: DHCP support, E-mail alert, Wi-Fi Multimedia (WMM) support, Wi-Fi Protected Setup (WPS), Wireless Distribution System (WDS) support, event log, firmware upgradable, load balancing, power over Ethernet (PoE), wireless bridge mode, IPv6 support, MAC address filtering, MIMO technology, Quality of Service (QoS), RADIUS support, Spanning Tree Protocol (STP) support, Syslog support, VLAN support
Compliant Standards: IEEE 802.11b, IEEE 802.11d, IEEE 802.3u, Wi-Fi Protected Setup, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n (draft), IEEE 802.1Q, IEEE 802.1p, IEEE 802.1x, IEEE 802.3, IEEE 802.3af
Wireless Protocol: 802.11b/g/n (draft)
Remote Management Protocol: HTTP, HTTPS, SNMP 1, SNMP 2c
Data Transfer Rate:300 Mbps
Wi-Fi Bands: 2.4 GHz
Spread Spectrum Method: DSSS, OFDM
Encryption Algorithm: 128-bit WEP, 64-bit WEP, WPA, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise
Status Indicators : Power, link OK, link/activity
Authentication Method: RADIUS, Radio Service Set ID (SSID), Basic Service Set Identifier (BSSID)
Power Over Ethernet (PoE)