Motu 828 Mk3 USA -01633914524

call : 01633914524

Used 1 Year
No Internal Or External Problem
Made in USA
FEATURES

Hybrid FireWire/USB2 connectivity lets you connect to your computer via either bus-powered FireWire or hi-speed USB2
CueMix FX - flexible 28 input/16 bus mixer with on-board DSP effects, including reverb with sends/returns, plus EQ and compression on every input and output
28 inputs / 30 outputs (at 44.1/48 kHz) - there's no channel sharing in the 828mk3; the mic inputs, S/PDIF I/O, headphone out and main outs are all handled as separate channels
Front-panel control lets you access any setting in your entire 828mk3 mix directly from the front panel
Standalone operation lets you program your mixes at the studio and then bring the 828mk3 to your gig with no computer needed
Tweak your mix on site using the back-lit LCD and front-panel controls
Multiple CueMix FX mixes - create different monitor mixes for the main outs and headphones, or add send/return loops for outboard gear with no latency
Two front panel combo jacks provide hi-Z 1/4" guitar input or low-Z XLR mic input with phantom power, pad, and plenty of gain
Mic/guitar instrument sends - add your favorite outboard EQ, preamp, reverb or other processor to the two mic/guitar inputs, before the signal goes digital
Clip protection - Mic/guitar input limiter prevents digital clipping and distortion from overloaded signal levels up to +12dB over zero
8 24-bit 192kHz analog inputs and outputs on balanced/unbalanced 1/4" TRS jacks
Precision Digital Trim - Digitally controlled analog trim on all analog inputs (mic/guitar inputs + 1/4" TRS inputs) provides accurate adjustments in 1dB increments
Fine-tune the balance of your analog inputs and then save/recall trim configurations
Flexible optical I/O - 16 channels of ADAT lightpipe, 8 channels of SMUX (96kHz) or two pairs of stereo TOSLink
Mix and match formats between the two banks
Connect a MIDI controller and/or sound module with no separate interface needed
The MIDI I/O is sample-accurate with supporting software
Add additional interfaces for more I/O as your needs grow
Separate XLR main outs and front-panel headphone jacks, each with independent volume control
Stereo 24-bit 96kHz S/PDIF in/out
Word clock in and out
SMPTE in and out
Includes 32- and 64-bit native drivers for Mac OS X and Windows 7/Vista/XP, including ASIO, WDM, Wave, Core Audio, and Core MIDI. Supports all popular Mac and Windows audio software
100% compatible with all host-based effects processing in today's popular audio programs
Includes AudioDesk full-featured sample-accurate workstation software for the Macintosh with recording, editing, mixing, realtime 32-bit effects processing & sample-accurate sync
Plug-and-play operation with your Mac or PC via FireWire or high-speed USB 2.0
Front panel volume control for monitoring - Stereo, Quad, 6.1, 7.1 and user-defined surround monitoring setups available
Two front-panel headphone jacks with independent volume controls
Front-panel meters or activity LEDs for all analog, digital and MIDI I/O, plus SMPTE sync tach and lock LEDs
Dedicated front-panel clock status LEDs
International 100-240V, 50-60 Hz auto-switching power supply
Includes

One 828mk3 I/O rack unit
One 6-pin to 6-pin IEEE 1394 "FireWire" cable
Power cord
One 828mk3 Mac/Windows manual
One AudioDesk Manual
One cross-platform installer CD
Product registration card

Order the 828mk3 to get 10 analog channels and 16 channels of ADAT digital I/O and stereo S/PDIF, and more.
SPECIFICATIONS
Mac System Requriements

A G4/500Mhz Power Mac or faster equipped with at least one FireWire port
At least 256MB (megabytes) of RAM (512MB or more is recommended)
Mac OS X (version 10.4.9 or later)
A large hard drive (preferably at least 100GB)

Windows System Requirements

A 1GHz Pentium-based PC compatible or faster equipped with at least one FireWire port
A Pentium III processor or faster is recommended
At least 256MB of RAM (512MB or more is recommended)
Windows XP or Vista
A large hard drive (preferably at least 100GB)