My ClickBD
Microcontroller Based PWM Solar Charge Controller. TECHNICAL SPECIFICATION OF CHARGE CONTROLLER: 1. Work voltage: 12V-48V Auto Detect 2. Rated charge current: 50Amp- 200Amp 3. Rated load current: 100Amp 4. Load disconnect: 11.4v 5. Load reconnect: 12.6v 6. Equalization voltage (10 minutes) 14.6v 7. Boost voltage 10 voltages: 14.4v 8. Float voltage: 13.6v 9. Over temperature protection starting at (Stop charging): 80ºC 10. Over temperature protection reset at (Restart Charging) ): 65ºC MONITORING: Digital LCD Display A digital LCD meter is available on this controller; it will continuously display battery voltage , charging , Load on/off or Temp indicate the battery voltage with 3 digitals, for example: 12.8 volt |